Welcome to Smart Agriculture 中文

Announcement

    Vol.1, No.4, Part 5: Intelligent Equipment and System
  • 1. Development and test of a flexible manipulator based on 3D printing

    Authors: Guohua Gao, Zengya Dong, Xiaona Sun, Hao Wang

    Citation: Gao G, Dong Z, Sun X, Wang H. Development and test of a flexible manipulator based on 3D printing[J]. Smart Agriculture, 2019, 1(1): 85-95. (in Chinese with English abstract)


    2. Development of an automatic steering test bench for tractors

    Authors: Juan Du, Min Li, Chengqian Jin, Xiang Yin

    Citation: Du J, Li M, Jin C, Yin X. Development of an automatic steering test bench for tractors[J]. Smart Agriculture, 2019, 1(2): 85-93. (in Chinese with English abstract)


    3. Effects of technical operation parameters on spray characteristics of rotor plant protection UAV

    Authors: Hang Zhu, Hongze Li, Yu Huang, Haitao Yu, Yunzhe Dong, Junxing Li

    Citation: Zhu H, Li H, Huang Y, Yu H, Dong Y, Li J. Effects of technical operation parameters on spray characteristics of rotor plant protection UAV[J]. Smart Agriculture, 2019, 1(3): 113-122. (in Chinese with English abstract)


    4. Design and application of data acquisition and analysis system for CropSense

    Authors: JiaojiaoWang, Bo Xu, CongcongWang, GuijunYang, ZhongYang, XinMei, XiaodongYang

    Citation: Wang J, Xu B, Wang C, Yang G, Yang Z, Mei X, Yang X. Design and application of data acquisition and analysis system for CropSense[J]. Smart Agriculture, 2019, 1(4): 91-104. (in Chinese with English abstract)

  • Pubdate: 2020-03-03    Viewed: 187