[1] | 杨光照 . 变约束连杆机构机械手的设计研究[D]. 无锡:江南大学, 2016. | [1] | Yang G . Design and study on flexible constraint linking mechanism robotic gripper[D]. Wuxi: Jiangnan University, 2016. | [2] | 张凯良, 杨丽, 王粮局 , 等. 高架草莓采摘机器人设计与试验[J]. 农业机械学报, 2012,43(09):165-172. | [2] | Zhang K, Yang L, Wang L , et al. Design and experiment of elevated substrate culture strawberry picking robot[J]. Transactions of the Chinese Society of Agricultural Machinery, 2012,43(09):165-172. | [3] | 梁喜凤, 苗香雯, 崔绍荣 , 等. 果实采摘机械手机构设计与工作性能分析[J]. 农机化研究, 2004(02):133-135, 139. | [3] | Liang X, Miao X, Cui S , et al. Design and realization of merit system online[J]. Journal of Agricultural Mechanization Research, 2004(02):133-135,139. | [4] | 李海英 . 发展农业机械化提高劳动生产效率[J]. 吉林农业, 2015(19):55. | [4] | Li H . Developing agricultural mechanization and improving labor production efficiency[J]. Jilin Agriculture, 2015(19):55. | [5] | Kondo N, Ting K . Robotics for plant production[J]. Artificial Intelligence Review, 1998,12(1-3):227-243. | [6] | Yasukawa S, Li B, Sonoda T , et al. Development of a tomato harvesting robot[C]// The 2017 International Conference on Artificial Life and Robotics, 2017: 408-411. | [7] | Yaguchi H, Nagahama K, Hasegwa T , et al. Development of an autonomous tomato harvesting robot with rotational plucking gripper[C]. IEEE/RSJ International Conference on Intelligent Robot and Systems, 2016: 652-657. | [8] | Vitzrabin E, Edan Y . Changing task objectives for improved sweet pepper detection for robotic harvesting[J]. Robotics and Automation Letters, 2016,1(1):578-584. | [9] | 周增产, Bontsema J, Van Kollenburg-Crisan L . 荷兰黄瓜收获机器人的研究开发[J]. 农业工程学报, 2001,17(06):77-80. | [9] | Zhou Z, Bontsema J, Van Kollenburg Crisan L . Development of cucumber harvesting robot in Netherlands[J]. Transactions of the Chinese Society of Agricultural Engineering, 2001,17(06):77-80. | [10] | Van Henten E J, Van Tuijl B J A, Hemminget J , et al. An autonomous robot for harvesting cucumbers in green houses[J]. Autonomous Robots, 2002,13(3):241-258. | [11] | Van Henten E J, Hemming J, Van Tuijl B J A , et al. Collision-free motion planning for a cucumber picking robot[J]. Biosystems Engineering, 2003,86(2):135-144. | [12] | Shigehiko Hayashi . Evaluation of a strawberry-harvesting robot in a field test[J]. Biosystems Engineering, 2010,105:160-171. | [13] | Bac C W, Roorda T, Reshef R , et al. Analysis of a motion planning problem for sweet-pepper harvesting in a dense obstacle environment[J]. Biosystems Engineering, 2016,146:85-97. | [14] | Eizentls P, Oka K . 3D pose estimation of green pepper fruit for automated harvesting[J]. Computers and Electronics in Agriculture, 2016,128:127-140. | [15] | Zhao Y, Gong L, Liu C , et al. Dual-arm robot design and testing for harvesting tomato in greenhouse[J]. International Federation of Accountants, 2016,49(16):161-165. | [16] | 李长勇, 房爱青, 谭红 , 等. 高架草莓采摘机器人系统研究[J]. 机械设计与制造, 2017(06):245-247, 251. | [16] | Li C, Fang A, Tan H , et al. Elevated strawberry picking robot system research[J]. Machinery Design and Manufacture, 2017(06):245-247, 251. | [17] | 刘祚时, 王亚平, 吴翠琴 . 脐橙采摘机器人快速视觉定位系统研究[J]. 江西理工大学学报, 2014(3):68-72. | [17] | Liu Z, Wang Y, Wu C . Study on the fast vision positioning system in the robot picking navel oranges[J]. Journal of Jiangxi University of Science and Technology. 2014(3):68-72. | [18] | 熊俊涛, 叶敏, 邹湘军 , 等. 多类型水果采摘机器人系统设计与性能分析[J]. 农业机械学报, 2013,44(s1):230-235. | [18] | Xiong J, Ye M, Zou X , et al. System design and performance analysis on multi-type fruit harvesting robot[J]. Transactions of the Chinese Society of Agricultural Machinery, 2013,44(s1):230-235. | [19] | 李秦川, 胡挺, 武传宇 , 等. 果蔬采摘机器人末端执行器研究综述[J]. 农业机械学报, 2008(03):175-179, 186. | [19] | Li Q, Hu T, Wu C , et al. Review of end-effectors in fruit and vegetable harvesting robot[J]. Transactions of the Chinese Society for Agricultural Machinery, 2008(03):175-179, 186. | [20] | Noritsugu T, Kubota M, Yoshimatsu S . Development of pneumatic rotary soft actuator made of silicone rubber[J]. Journal of Robotics and Mechatronics, 2001,13(1):17-22. | [21] | 钱少明 . 基于FPA的多指机械手及其在果实采摘中的应用研究[D]. 浙江工业大学. | [21] | Qian S . Research on multi-fingered robot hand based on the flexible pneumtatic actuator FPA and its application in fruit picking[D]. Zhejiang University of Technology. | [22] | 鲍官军, 高峰, 荀一 , 等. 气动柔性末端执行器设计及其抓持模型研究[J]. 农业工程学报, 2009,25(10):121-126. | [22] | Bao G, Gao F, Xun Y , et al. Flexible end-effector based on flexible pneumatic actuator and its grasping model[J]. Transactions of the Chinese Society of Agricultural Engineering, 2009,25(10):121-126. | [23] | 徐淼鑫 . 气压驱动软体夹持装置研究[D]. 南京: 南京理工大学, 2015. | [23] | Xu M . Study of pneumatic drive in soft finger device[D]. Nanjing: Nanjing University Of Science And Technology, 2015. | [24] | 徐淼鑫, 李小宁, 郭钟华 . 新型柔性夹持装置软体手指的数学模型研究[J]. 机械制造与自动化, 2016,45(05):99-102. | [24] | Xu M, Li X, Guo Z . Study of mathematical model of soft finger in new flexible gripper[J]. Machine Building and Automation, 2016,45(05):99-102. | [25] | 金波, 林龙贤 . 果蔬采摘欠驱动机械手爪设计及其力控制[J]. 机械工程学报, 2014,50(19):1-8. | [25] | Jin B, Lin L . Design and force control of an underactuated robotic hand for fruit and vegetable picking[J]. Journal of Mechanical Engineering. 2014,50(19):1-8. | [26] | Telegenov K, Tlegenov Y, Shintemirov A . A low-cost opensource 3-D-printed three-finger gripper platform for research and educational purposes[C]// IEEE Access, v3, 2015: 638-647. | [27] | Mutlu R, Tawk C, Alici G , et al. A 3D printed monolithic soft gripper with adjustable stiffness[C]// IECON 2017, Conference of the IEEE Industrial Electronics Society. IEEE, 2017: 6235-6240. | [28] | Anver H M C M, Mutlu R, Alici G . 3D printing of a thin-wall soft and monolithic gripper using fused filament fabrication[C]// IEEE International Conference on Advanced Intelligent Mechatronics. IEEE, 2017: 442-447. | [29] | 陆叶 . 基于3D打印和Arduino的单臂轮式机器人的设计[J]. 机械制造与自动化, 2017,46(03):168-171. | [29] | Lu Y . Design of Single Arm-wheeled Robot Based on 3D Printing and Arduino[J]. Machine Building and Automation, 2017,46(03):168-171. | [30] | 傅思程, 吴静漪, 陈中柘 . 基于3D打印技术的仿人机械手的设计及简易实现[J]. 工业控制计算机, 2018,31(01):39-40. | [30] | Fu S, Wu J, Chen Z . Design and Simply Implementation of Manipulator Based on 3D Printing Technology[J]. Industrial Control Computer, 2018,31(01):39-40. | [31] | 马怀振, 张家梁, 封莹 . 3D打印末端夹持器的设计[J]. 机械设计与制造, 2018(11):171-174. | [31] | Ma H, Zhang J, Feng Y . Design of the 3D printing terminal gripper[J]. Machinery Design and Manufacture, 2018(11):171-174. | [32] | Wang Z, Chathuranga D S, Hirai S . 3D printed soft gripper for automatic lunch box packing[C]// IEEE International Conference on Robotics and Biomimetics. IEEE, 2017: 503-508. | [33] | Yang Y, Chen Y . Novel design and 3D printing of variable stiffness robotic fingers based on shape memory polymer[C]// IEEE International Conference on Biomedical Robotics and Biomechatronics. IEEE, 2016: 195-200. | [34] | Zhang H, Wang M, Chen F , et al. Design and development of a soft gripper with topology optimization[C]// Ieee/rsj International Conference on Intelligent Robots and Systems. IEEE, 2017: 6239-6244. | [35] | Udupa G, Sreedharan P, Dinesh P S , et al. Asymmetric bellow flexible pneumatic actuator for miniature robotic soft gripper[J]. Journal of Robotics, 2014,2014:1-11. | [36] | Bilodeau R A, White E L, Kramer R K . Monolithic fabrication of sensors and actuators in a soft robotic gripper[C]// Ieee/rsj International Conference on Intelligent Robots and Systems. IEEE, 2015: 2324-2329. | [37] | 孙伏 . 机械手D-H坐标系建立分析[J]. 陕西理工学院学报(自然科学版), 2016,32(6):24-28. | [37] | Sun F . Building D-H coordinate system analysis to robots[J]. Journal of Shaanxi University of Technology (Natural Science Edition), 2016,32(6):24-28. | [38] | 高国华, 任晗, 王皓 , 等. 热塑性聚氨酯材料柔性外壳3D打印技术[J]. 北京工业大学学报, 2018,44(04):497-506. | [38] | Gao G, Ren H, Wang H , et al. Study on 3D printing technology for TPU flexible shell[J]. Journal of Beijing University of Technology, 2018,44(04):497-506. |
|